Roof Progress

7th July 2012:  Slow (no) progress for some time due to weather, and being busy.  Managed a little progress on the roof this morning.  I covered the overhang with 5mm ply.  This isn't structural grade, but is fully supported, and only 50mm deep.  5mm used to limit the height difference to the insulated panels.  The height difference now will be only 5mm, so won't cause an issue when it comes to the edpm waterproof membrane.

Pic below shows the covered overhang from above:

The roof covered again and ready for the next rally of rain:

Latest pic of front.  Next steps to fit facias and EPDM roof membrane.  I'll then be waterproof and ready to clad, fit soffits (plus external lights) fit the doors, then just the internals left.  The final stage will also be the decking landscaping around the front....

Facias fitted all around.  Cedar on the front and sides, large UPVC facia on the back.

Close up of the roof corner from above.  See the plastic facia on the back, and Cedar on the sides.

EPDM fitting: